1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose. The operating manual includes important in-
structions for safe, proper and economic operation of
the device, for avoiding danger, for minimising repair
costs and downtimes, and for increasing the reliability
and extending the service life of the device. In addition
to the safety instructions in this operating manual, you
must also observe the regulations applicable to the op-
eration of the device in your country. Keep the operat-
ing manual at the device, in a plastic sleeve, protected
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work. The device may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards. The
required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
22 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1.
Shrub cutting blade
2.
Motor/housing
3.
-
4.
USB-C charge port
5.
Charge status indicator
6.
Safety key
7.
Start button
8.
Locking (left and right)
9.
Release buttons for blade attachment
10. Grass cutting blade
11. Shrub cutting blade guard
12. Grass cutting blade guard
13. Power supply
14. -
15. Handle
3. Scope of delivery
Item
Quantity
1x
10
1x
1
1x
11
1x
12
1x
13
1x
1x
4. Proper use
The product is intended for carrying out light cutting
work on bushes and lawn edges in private gardens or
allotments.
The observance of the manufacturer's usage instruc-
tions included is a prerequisite for the proper use of
the device.
m ATTENTION It is not permitted to use the device for
shredding in the context of composting due to the dan-
ger to persons and the risk of property damage.
www.scheppach.com
Designation
Cordless grass & hedge trimmer
Grass cutting blade
Shrub cutting blade
Shrub cutting blade guard
Grass cutting blade guard
Power supply
Operating manual