Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with it and must be informed about potential
dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the ma-
chine.
The machine may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our equipment was not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the device is used in
commercial or industrial applications, or for equivalent
work.
5. Safety instructions
General safety instructions
m WARNING Read all safety information and in-
structions. Failure to observe safety information
and instructions can result in electric shock, fire
and/or serious injuries.
Save all warnings and instructions for future ref-
erence.
The term "electric tool" used in the safety instructions
refers to mains-powered electrical tools (with a mains
cable) and battery-powered electrical tools (without
a mains cable).
1.
Work area safety
a) Keep your work area clean and well-lit. Cluttered
or dark areas invite accidents.
b) Do not work with the electric tool in an explo-
sive environment where flammable liquids, gas-
es or dusts may be located. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and other people away while us-
ing the electric tool. Distractions may cause you
to lose control of the device.
2.
Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water penetrating an electric device increas-
es the risk of an electric shock.
d) Do not use the cable for another purpose, for
example, carrying or hanging the power tool or
pulling the plug out of the socket. Keep the ca-
ble away from heat, oil, sharp edges or moving
device parts. Damaged or coiled cables increase
the risk of an electric shock.
e) If you work with a power tool outdoors, only
use extension cables that are also suitable for
outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3.
Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of carelessness when using electrical tools
can result in serious injuries.
www.scheppach.com
GB | 23
Werbung
