Sage the Oracle Jet SES985 Handbuch Seite 3

current not more than 30mA
are recommended. Consult
an electrician for professional
advice.
• Regularly inspect the
power cord, plug and actual
appliance for any damage. If
found to be damaged in any
way, immediately cease use of
the appliance and return the
entire appliance to the nearest
authorised Sage Service
Centre for examination,
replacement or repair.
• Do not let the power cord hang
over the edge of a counter or
table. Do not let the power cord
touch hot surfaces or become
knotted.
• To eliminate a choking hazard
for young children, discard the
protective cover fitted to the
power plug safely.
• Position the appliance on a
stable, heat resistant, level, dry
surface away from the counter
edge, and do not operate on or
near a heat source such as a
hot plate, ovenor gas hob.
• Do not operate the appliance
in an enclosed space, or inside
a cupboard.
• Do not use attachments
other than those provided
with the appliances. The use
of attachments not sold or
recommended by Sage may
cause fire, electric shock or
injury.
• This appliance is for household
use only. Do not use the
appliance for anything other than
its intended purpose. Do not use
in moving vehicles or boats. Do
not use outdoors. Misuse may
cause injury.
• Keep the appliance and
accessories clean. Follow the
cleaning instructions provided in
this book. Servicing other than
cleaning should be performed
at an authorised Sage Service
Centre.
• Do not touch hot surfaces.
Always ensure the appliance
has been allowed to cool; if the
appliance is to be:
- Left unattended, cleaned,
changed accessories, moved,
assembled or stored, always
switch off the espresso machine
by pressing the POWER button
to OFF. Switch off at the power
outlet and unplug.
• Improper use of the appliance
incorrectly operated or
unprofessionally repaired. In
such a case, any warranty claim
is void. No warranty for any
damages can be accepted.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote-control system.
• Use caution when operating
machine as metal surfaces
are liable to get hot during use.
Heating element surface is subject
to residual heat after use.
EN
3