Lubrication And Maintenance Chart - Ransomes HR6010 Sicherheits-, Bedienungs- Und Wartungshandbuch

9.1 LUBRICATION AND MAINTENANCE CHART

Interval
First 50 hours
Daily
10 hours
Every 50 hours
Weekly
Every
250 hours
End of season
or
Every
1000 hours
Lubricate all Grease fittings with K NATE or equivilent Grease Weekly (See Chart)
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures
A Engine Oil (with filter)
B Hydraulic Oil (with filter)
C Radiator Coolant
D Fuel
MAINTENANCE AND LUBRICATION CHART
Item

Change Engine Oil

Check Fan Belt Tension

Check Engine Oil Level

Check Safety Interlock System

Check Engine Coolant Level

Check Hydraulic Fluid Level

Check Tyre Pressure

Check Engine Bay for Debris

Check for Loose Components

Check for Hydraulic Leakes

Check Fan Belt Tension

Check Air Filter Tail Tell indicator

Change Engine Oil & Oil Filter

Change Battery Condition

Change Engine Oil & Oil Filter

Change Air Filter Element *

Replace Fuel Filters

Change Hydraulic Oil & Filters

Drain & Clean Fuel Tank

Drain & Replace Engine Coolant
* Check more often in dirty conditions
FLUID REQUIREMENTS
10.6 Litres (2.8 US gals)
37 Litres (9.7 US gals)
5.5 Litres (1.45 US gals)
64 Litres (17 US gals)
LUBRICATION AND MAINTENANCE 9
IMPORTANT
Quantity
Section
Type
10W 30
10W 30
50% Anti-Freeze
No 2-D (ASTMD975) Diesel
en-49