Hourmeter; Bonnet Release Key - Ransomes HR6010 Sicherheits-, Bedienungs- Und Wartungshandbuch

6.12 HOURMETER

Located on the left hand side of the steering tower,
above the parking brake. (A) Records engine
running hours.
6.13 OVER HEAT ALARM SYSTEM (For M/Cs
Post-October 2006)
a) A biased switch (M) has been added to
the control panel. This illuminates when
the engine temperature reaches 105°C or
when engine is running and the switch is
depressed.
b) When illuminated and a continuous alarm
will sound, the cutter decks will stop. If this
occurs, reduce the engine speed to idle
for five minutes before stopping to resolve
the problem.
6.14 HORN
The horn is an audible alarm for the following
situations:
a) Horn (A) sounds continuously-this indicates a high
engine coolant temperature condition. If this
occurs, turn off the engine immediately and
resolve the problem.
b) Horn (A) sounds intermittently-this indicates a low
engine oil pressure condition. If this occurs, turn

6.15 BONNET RELEASE KEY

Release bonnet by inserting key (A) into base of
latch bracket.
CONTROLS 6
A
A
en-27