Cleaning; Maintenance; Repair; Storage - Parkside Performance Pabsp 20 Li C3 Kurzanleitung/Originalbetriebsanleitung

˜ Cleaning
NOTE
Do not use chemical, alkaline, abrasive or other
u
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
Never allow fluids to get into the product.
The product must always be kept clean, dry and free from
oil or grease. Remove debris from it after each use and
before storage.
Regular and proper cleaning will help ensure safe use and
o
prolong the life of the product.
Clean the product with a dry cloth. Use a soft brush for
o
areas that are hard to reach.
In particular clean the air vents after every use with a cloth
o
and soft brush.
The vents must always be clear.
˜ Maintenance
Before and after each use, check the product and
accessories (e.g. accessory tools) for wear and damage.
If required, exchange them for new ones as described in
this instruction manual. Observe the technical requirements
(see "Technical data").
˜ Repair
This product does not contain any parts that can be repaired
by the user. Contact an authorised service centre or a similarly
qualified person to have it checked and repaired.
˜ Storage
Push the rotation control switch
o
lock the on/off switch
6 ] [
Clean the product as described above.
o
Store the product and its accessories in a dark, dry,
o
frost-free, well-ventilated place.
Always store the product in a place that is inaccessible
o
to children. The ideal long term storage (longer than
3 months) temperature is between +20 and +26 °C.
Guide the drill bit into the bit holder
o
Store the product in its carrying case
o
38 GB/IE
to the centre position to
5 ] [
.
.
8 ] [
.
[ ]
Battery pack advice
Only store the battery pack
o
battery pack should be charged to 40 to 60 % (red and
orange LED in the charge indicator
storing for extended periods.
Check the battery pack charge about every 3 months
o
when storing for extended periods. Recharge as necessary.
˜ Transportation
Push the rotation control switch
o
lock the on/off switch
[ 6 ]
Transport the product in its carrying case
o
Protect the product from any heavy impact or strong
o
vibrations which may occur during transportation in
vehicles.
Secure the product to prevent it from slipping or falling
o
over.
˜ Disposal
The packaging is made entirely of recyclable materials, which
you may dispose of at local recycling facilities.
Observe the marking of the packaging materials
for waste separation, which are marked with
abbreviations (a) and numbers (b) with following
meaning: 1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials.
Product:
The product incl. accessories and packaging materials are
recyclable and are subject to extended producer responsibility.
Dispose them separately, following the illustrated Info-tri (sorting
information), for better waste treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
To help protect the environment, please dispose of
the product properly when it has reached the end
of its useful life and not in the household waste.
Information on collection points and their opening
hours can be obtained from your local authority.
partially charged. The
[ ]
light up) before
[ ]
to the centre position to
5 ] [
.
.
[ ]