Normal Mode - Renkforce WH2315 Bedienungsanleitung

b) Normal mode
If no button is pushed, the basis station is always in normal mode. If the basis station is in another mode, you can
briefly push the "HISTORY" (7) button to return to normal mode. Alternatively, wait for 30 seconds without pushing a
button.
Use the " " (3) or "
the arrow symbol " ".
The two lower lines of each display range show the corresponding information.
The 11 digits on the left side are used to display text; the right side can display figures.
The display will automatically switch after a few seconds. Use the "
the display.
The following information will appear in the corresponding display ranges:
Display range for time/date
If the arrow symbol "
• Year, weekday
• Alarm time and status of the alarm time (on/off)
• Name of the moon phase
Display range for light radiation/UV-index
If the arrow symbol "
• Max. lighting strength of the current day (incl. time at which the maximum occurred)
• Max. lighting strength since the last reset (incl. date/time at which the maximum occurred)
• Max. UV-index of the current day (incl. time at which the maximum occurred)
• Max. UV-index since the last reset (incl. date/time at which the maximum occurred)
66
" (4) button to select a display range. The respective chosen display range is marked with
" is in this display range, the lower lines will show the following information:
" is in this display range, the lower lines will show the following information:
" (1) or " " (2) buttons to manually switch