Renkforce WH2315 Bedienungsanleitung Seite 74

Setting function "BAROMETRIC SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) briefly repeatedly until the setting function "BAROMETRIC SETTING" is displayed.
Use the " " (4) button to select the desired subfunction:
• "CURRENT WEATHER": Current weather
Use the " " (1) or "
symbols in the display of the basis station.
• "BAROMETRIC PRE-SET": Step width for bar chart display
Use the " " (1) or "
bar of the bar chart display will correspond to the barometric pressure change of 2 hPa.
• "BAROMETRIC PRE-STORM": Barometric pressure change for storm recognition
Use the " " (1) or "
recognise a storm. If, for example, "7" is set, an air pressure change of 7 hPa within one hour will lead to storm
recognition.
• "BAROMETRIC COORDINATES": Time selection for bar chart display
Use the " " (1) or "
Setting function "CONTRAST SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) briefly repeatedly until the setting function "CONTRAST SETTING" is displayed.
Then briefly push the button "
Use the " " (1) or "
Setting function "KEY BEEP SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) briefly repeatedly until the setting function "KEY BEEP SETTING" is displayed.
Then briefly push the button "
Use the " " (1) or "
button or not.
74
" (2) buttons to set the current weather. This increases accuracy of the weather forecast
" (2) buttons to set the step width for the bar chart display. For example, if you set "2", each
" (2) buttons to set a value as of which barometric pressure change the basis station will
" (2) buttons to set the duration for the bar chart display (the last 12 or 24 hours).
" (4).
" (2) buttons to set the contrast for the LC display.
" (4).
" (2) buttons to select whether a brief confirmation sound is to be output at every push of a