C) Setting Date, Time Zone, Language For The Weekday Display, 12H-/24H Mode And Time - Renkforce AOL-5052B Bedienungsanleitung

c) Setting Date, Time Zone, Language for the Weekday Display,
12h-/24h Mode and Time
• To start setting mode, keep the button „MODE" (A) pushed for about 3 sceonds until
the year flashes in the display.
• Set the year with the buttons „+" and „-".
Keep the respective button pressed for quick adjustment.
If you do not push any button for a few seconds, the settings made until then
are saved and setting mode is left.
This also applies to the following settings.
• Briefly push the button „MODE" (A). The month flashes. Set it with the buttons „+"
and „-".
• Briefly push the button „MODE" (A). The date flashes. Set it with the buttons „+"
and „-".
• Briefly push the button „MODE" (A). The time zone flashes. Set it in the range of
-12 to +12 hours with the buttons „+" and „-".
• Briefly push the button „MODE" (A). The language for the weekday abbreviation flashes.
Set the language with the buttons „+" and „-".
GE = German
EN = English
IT = Italian
FR = French
DU = Dutch
SP = Spanish
DA = Danish
• Briefly push the button „MODE" (A). The display „12Hr" or „24Hr" for 12h/24h display
mode for the time flashes. Set the desired mode with the buttons „+" or „-".
In 12h mode, „PM" is displayed to the left of the time in the second half of the day.
• Briefly push the button „MODE" (A). The hours of the time flash. Set it with the buttons
„+" and „-".
39