Renkforce WH2315 Bedienungsanleitung Seite 73

Setting function "UNIT SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) briefly repeatedly until the setting function "UNIT SETTING" is displayed.
Use the " " (4) button to select the desired subfunction:
• Subfunction "LIGHT UNIT": Unit of lighting strength
Use the " " (1) or "
• Subfunction "TEMPERATURE UNIT": Unit of the temperature
Use the " " (1) or "
• Subfunction "BAROMETRIC UNIT": Unit of the barometric pressure
Use the " " (1) or "
inHg).
• Subfunction "WIND SPEED UNIT": Unit of the wind speed
Use the " " (1) or "
mph)
• Subfunction "RAINFALL UNIT": Unit of the rain volume
Use the " " (1) or "
Setting function "RECORD SAVE INTERVAL"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) button briefly repeatedly until the setting function "RECORD SAVE INTERVAL" is displayed.
Then briefly push the button "
Use the " " (1) or "
The shorter the recording duration is set, the faster will the internal memory fill and the more often will you
have to read the values on the computer.
Setting function "RAIN SEASON SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) button briefly repeatedly until the setting function "RAIN SEASON SETTING" is displayed.
Then briefly push the button "
Use the " " (1) or "
" (2) buttons to select the desired unit for the lighting strength (you can set W/m², lux, fc).
" (2) buttons to select the desired unit for the temperature (you can set °C, °F).
" (2) buttons to select the desired unit for the barometric pressure (you can set hPa, mmHg,
" (2) button to select the desired unit for the wind speed (you can set km/h, bft, m/s, knots,
" (2) buttons to select the desired unit for the rain volume (you can set mm, inch).
" (4).
" (2) buttons to select the desired recording interval for the measured values.
" (4).
" (2) button to choose the start of the month as of which the total rain volume will be deleted.
73