Technical Data Of The Vehicle - Reely 1486282 Bedienungsanleitung

The vehicle does not reverse.
• The jumper „Reverse" can be used to switch off reversing. In the position „Enable", reversing is on. In the position
„Disable", it is off. Observe chapter 9. c).
• Between switching from forward to reverse driving, the throttle/brake lever at the transmitter must be in the neutral
position briefly. If you move the throttle/brake lever from forward to reverse without a break, the brake will be acti-
vated; the vehicle will not reverse!

15. Technical Data of the Vehicle

Scale .................................................................1:10
Suitable drive battery ........................................6-cell NiMH drive battery (rated voltage 7.2 V)
Drive .................................................................Electrical motor type 540
Undercarriage ...................................................Single-wheel suspension, double transverse link
Dimensions (L x W x H) ....................................420 x 195 x 135 mm.
Tyre dimensions (W x Ø) ..................................26 x 63 mm
Wheel base .......................................................260 mm
Ground clearance .............................................12 mm
Weight ..............................................................approx. 1150 g (without drive battery)
Minor deviations in dimensions and weight are due to production technical reasons.
2-cell LiPo drive battery (rated voltage 7.4 V)
Four wheel drive via cardan shaft
Ball-bearing drive
Differential in front and rear axles
Oil pressure shock absorber with spiral springs, adjustable
Wheel alignment of the front wheels can be set
Front and rear axle camber can be set
53