Parkside Performance PABSP 20 Li C3 Bedienungsanleitung Und Originalbetriebsanleitung Seite 9

The following warnings are used in the instruction manual, short manual, on the packaging and on
Read the instruction manual.
Follow the warnings and safety notes!
Use in dry indoor rooms only.
Wear protective gloves!
Protection class II (double insulation)
CE mark indicates conformity with
relevant EU directives applicable for this
product.
Safety information
Instructions for use
CORDLESS DRILL DRIVER - 20V
˜ Introduction
Congratulations on the purchase of your new
CORDLESS DRILL, hereafter referred to only as
"the product".
You have chosen a high-quality product. The user
manual forms an integral part of this product.
It contains important information on operation,
safety, use and disposal. Prior to use of the
product, familiarise yourself with the product and
all operation and safety notes. For this purpose,
carefully read the following operation instructions
and safety notes.
Only use the product as described and for the
applications stated. Keep this manual in a safe
place. If you hand the product on to third parties,
all documentation must be passed on as well.
Warnings and symbols used
the rating label:
Switch the product off and remove
the battery pack before replacing
attachments, cleaning and when not in
use.
Protect the battery pack against heat
and continuous intense sunlight.
Protect the battery pack against water
and moisture.
Protect the battery pack from fire.
Alternating current/voltage
Direct current/voltage
Fuse
T3.15A
˜ Intended use
The product is designed for inserting, tightening
and loosening screws as well as drilling in wood,
metal, ceramics, and plastics.
The product is not intended to drill into very hard
materials such as cement or concrete.
Always use the correct accessory tools according
to the intended use! Observe the technical
requirements of this product (see "Technical
data") when purchasing and using accessory
tools!
The LED work light on this product is intended
[ ]
to illuminate the immediate work area.
GB 7