Parkside Performance PABSP 20 Li C3 Bedienungsanleitung Und Originalbetriebsanleitung Seite 21

Belt clip (fig. J)
m CAUTION! RISK OF INJURY!
Before hanging the product in the belt:
u
Push the rotation direction switch
the centre position (lock). This prevents
the product from being switched on
accidentally.
NOTE
The belt clip allows the tool to be
u [ 9 ]
hooked on belt or pocket.
The belt clip is not assembled upon
u
delivery.
The belt clip can be mounted on either side
u
of a belt.
For the assembly of the belt clip a cross tip
u
screwdriver is required.
1. Use a cross tip screwdriver to loosen the
screw of the belt clip
2. Insert the belt clip on either side of the
product.
3. Use a cross tip screwdriver to tighten the
screw.
˜ Connecting the product to the
Lidl Home app
˜ Activate/deactivate the
Bluetooth function on the
®
battery
Press and hold the
o
battery pack for 3 seconds to activate
[ ]
the Bluetooth function. The orange LED of
®
the charging level LEDs
Bluetooth function is enabled.
®
Release the button
o
Press and hold the
o
battery pack for 10 seconds to deactivate
[ ]
the Bluetooth function. The orange LED of
®
the charging level LEDs
function is deactivated. In the Lidl
Bluetooth
®
Home app the product is shown as offline.
to
[ 5 ]
.
[ 9 ]
button on the
[ ]
lights up. The
[ ]
.
[ ]
button on the
[ ]
goes off. The
[ ]
˜ Connecting the product to the
Lidl Home app
NOTE
The product can only be connected to the
u
Lidl Home app if the battery pack
inserted in the product.
Only Smart Performance rechargeable
u
batteries can be connected to the Lidl
Home app.
Press and hold the
o
battery pack for 3 seconds to activate the
[ ]
Bluetooth function.
®
Enable the Bluetooth
o
smartphone.
Open the Lidl Home app.
o
There are 3 different options to connect the
o
product to the Lidl Home app:
Connecting the product for the first time
to the Lidl Home app:
{Add device}
1. Select
The Lidl Home app scans the area for
available devices. The Lidl Home app
indicates if available devices have been
found.
NOTE
If the Lidl Home app cannot find
u
available devices, continue with "No
automatic suggestion of available devices".
{Go to add}
2. Tap
devices in the list.
3. Tap to select the battery pack
NOTE
Select only one device at a time. If there
u
are check marks for other products:
Tap to clear the marks.
4. Tap .
{Done}
5. Tap to confirm the connection. The
battery pack is listed in the
be selected.
6. Select the battery pack. The information of
the cordless drill "PABSP 20 Li C3 (2207)"
{Device
can be found in
is
[ ]
button on the
[ ]
function on your
®
on the tab.
to show the available
.
[ ]
tab and can
info}.
GB 19