Parkside Performance PABSP 20 Li C3 Bedienungsanleitung Und Originalbetriebsanleitung Seite 22

NOTE
{Smart device not
If
u
{Device
displayed under
Check if the battery pack
into the product.
Check if the connection status LED
up continuously.
NOTE
If the connection status LED
u
light up continuously:
Connect the product to the battery
pack .
[ ]
Press the on/off switch
The connection status LED
few seconds and lights up continuously. The
information of the cordless drill "PABSP 20
Li C3 (2207)" is shown in
The products were already connected to
the Lidl Home app:
tab. The Lidl Home app
Tap on the
o
scans the area for available devices. The Lidl
Home app indicates if available devices
have been found.
NOTE
If the Lidl Home app cannot find
u
available devices, continue with "No
automatic suggestion of available devices".
No automatic suggestion of available
devices:
1. Tap on the tab.
{Other}
2. Select in the bar on the left.
3. Select {Other-2}. The display flashes rapidly.
The Lidl Home app scans the area for
available devices.
4. Tap to select the battery pack
add the battery pack to the app.
5. Tap {Next}.
6. Tap {Done}. The {Overview}
battery pack is shown.
7. The information of the cordless drill
"PABSP 20 Li C3 (2207)" can be found in
{Device info}.
20 GB
connected}
is
info}:
is inserted
[ ]
lights
[ ]
does not
[ ]
for 5 seconds.
6 ] [
blinks for a
[ ]
{Device info}.
and to
[ ]
page of the
NOTE
Upgrading the firmware can change the
u
features of the Lidl Home app.
˜ Features of the Lidl Home app
If you select a battery pack, this will take you to
the battery pack overview page.
˜ Smart battery pack
Brief overview (above)
In the upper window, a brief overview of the
o
battery pack and the following details are
displayed:
– current temperature
– the status
– the time to complete discharge
– state of charge in %
If you swipe right on the top window, you
o
scroll through charts showing the following
details:
– the temperature curve (the red line in the
shows the overheating threshold. The black
line shows the current battery temperature)
– the charging current curve
– the discharge current curve
– the capacity curve
{Locking the battery
Set a PIN to lock and unlock the battery pack
o
for use
{Battery pack work
Select work modes:
o
{Performance}
–
{Balance}
–
{ECO}
–
{Expert}.
–
{Expert}
In mode, you can set the
low discharge voltage and maximum
continuous discharge current yourself
pack}
mode}