Werbung
Verfügbare Sprachen
Verfügbare Sprachen
COMPUTER OPERATION MANUAL
• If DISPLAY MODE is set to OFF on the main control function page, the system will enter
sleep mode if no speed is entered and no button is pressed for five minutes. The backlight
and display will turn off, and the resistance during the sleep mode should be set to 1.
• If PAUSE MODE is set to ON and no speed is entered for 30 seconds, the system enters
pause mode.
1. if no button is pressed for 3 minutes, etc., the system enters SUMMARY mode.
If no button is pressed for a further 3 minutes, the system returns to IDLE MODE.
2. if the manual exit button is pressed to return to SUMMARY mode and no button
is pressed for 3 minutes, the appliance returns to IDLE MODE.
• If PAUSE MODE is switched off and no speed is entered for 30 seconds, the appliance goes
into pause mode. If no button is pressed and the device remains on the pause screen, and
if the manual exit button is pressed to return to SUMMARY, it will return to EMPTY MODE
after 3 minutes.
Software Version
Firmware Version
UPDATE function
When the system recognises the file AC00551-52E-03.apk on the U-Disk, the „Update S/W"
indicator lights up. Pressing the „Update S/W" button displays the file list selection page and
initiates the standard Android system update process. This process cannot be customised.
Once the update process is complete, the system will automatically restart and return to the
HCP. Note that the power supply should not be interrupted during the update, as this may
damage the system and prevent normal operation.
If the system recognises the file AC00551-52E-03-220818_V10-4094d7c08fc6f4e0-4094d7c08f-
c6f4e0.bin on the U-Disk, the subordinate firmware update can be performed by clicking on
the hidden button next to the „Update S/W" button. Here too, it is important not to interrupt
the power supply during the update process in order to avoid possible system damage.
Function
Total Time
Total Distance
SDK Version
MCU Version
Reset
52
Description
Total workout time
Total distance
APP version, not editable
SDK version, not editable
Firmware version, not editable
Subordinate firmware version, not
editable.
Pressing resets Total Time and Total
Distance
Werbung
