Storage - Sartorius Ambr CF Installationsanleitung

Storage

20 Installation Instructions Ambr
Push the pressure plate (1) all the way backwards. This closes the filter
t
holder.
Push the handle (2) into the initial position. The clamp is self-closing and
t
requires only a small amount of force to close.
1
Follow the prompts on the screen of the control unit.
t
2
7 Storage
Requirements
The filter has been removed and a clean-in-place has been performed (see
chapter 6, page 18).
Procedure
Disconnect and store the Female Luer threaded cap, Female Luer to
t
Luer lock connectors, CIP fitting and tubeset.
Ensure any remaining liquid in the tubing and fitting is properly drained.
t
Store the adapter, holder and filter guide according to the ambient
t
conditions (see chapter "9.2 Ambient Conditions at the Installation Site",
page 22).
CF Adapter Kit
®