Manufacturer's Contact Information; Attached Illustrations - Vari Rbs-700D Bedienungsanleitung

Table 18: Nameplate - example

2.6 Manufacturer's Contact Information

VARI,a.s. Phone: (+420) 325 607 111
Opolanská 350 E-mail:
289 07 Libice nad Cidlinou
The Czech Republic
You will find the list of the authorized service centres on our web page.

2.7 Attached illustrations

The attached illustrations are common for all language versions. hey can be found at the end of this manual in Chapter 4 , page 44.
High-resolution colour pictures are included in the electronic version of these operating instructions, which available for download from our
web pages.
1) Plastic mowing drum cover
2) Steel safety mowing drum cover
3) Mowing drum
4) Blades
5) Machine chassis
6) Handle
7) Steel V-belt cover
8) M10x30 bolt with pin - front attachment point
Fig. 1: Description of the machine
1) Right-side protective cover
2) Cover bracket from the machine packaging
3) M6x16 collar screw (3 pcs)
4) Chassis moulding
5) Right-side cover
6) M8x20 screw (Allen, 1 ks)
7) Flat washer 8.4mm
8) M6x16 collar screw (3 pcs
Fig. 2: Machine Assembly
Fig. 3: Travel Speed Selection
Fig. 4: Control elements on handlebars
Fig. 5: Attachment points on the RAPTOR Hydro carrier chassis
Fig. 6: AttachingIremoving the adaptor
Fig. 7: The Machine Working Width
Fig. 8: Lubrication points - pulley pins
1) M10 nut, low
2) M10x20 collar screw
Fig. 9: Blade replacement
Fig. 10: Tension pulley adjustment process
Fig. 11: V-Belt Change
Fig. 12: Safety Pictograms
For machine assembly:
wrench flat 10mm - 2x
wrench flat 13 mm - 1x
Fig. 13: Recommended Tools and Accessories
28
vari@vari.cz
Web: http://www.vari.cz
9) M6 collar nut (3 pcs)
10) 6.6 washer large (9 pcs)
11) Mud flap
12) Chassis cut-out
13) Plastic mowing drum cover
14) Mud flap steel bracket
15) Handle
16) M6x16 screw (10 pcs)
Forward
For machine assembly and work:
low angled ratchet 3/8".
Field Description
Device type designation
Type
RBS-700D
Unique serial identification number:
№
1005900233.0218.00001
Business (order) number:
C№
4479
http://www.vari.cz
9) Groove - rear attachment point
10) Adaptor drive V-belt
11) Tensioning pulley
12) Tensioner lever
13) Plastic butterfly nut
14) Arrow sticker direction of rotation
15) Sticker safety information
16) Sticker safety information
17) Self-locking nut M6 (12 pcs)
18) Screw with hemispherical head and square (2
pcs)
19) Outside mud flaps (2 pcs)
20) Belt cover, lower
21) M6x12 collar screw (in the chassis moulding, 4
pcs)
Neutral
3) Blade
4) Blade insert
For machine assembly:
12-point socket – 3/8" - 10 mm
12-point socket – 3/8" - 13 mm
To use during work:
12-point socket – 3/8" - 10 mm
12-point socket – 3/8" - 15 mm
12-point socket – 3/8" - 16 mm
RBS-700D
(product.period.sequence)
http://katalognd.vari.cz
Reverse