Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Water evacuation feature
NOTICE
Water evacuation is disabled by default and can being activated with Set&Go.
ü During the 6 hours following the disappearance of the rain, when a movement order,
the pergola remains at 60% (≈45 °) for 4 minutes, allowing perfect evacuation of the
water, before continuing its movement.
ü This behaviour is executed if:
• Not yet executed in the last 6 hours.
• If the requested position is upper than 45°
2.5.4.3. In case of snow
NOTICE
For snow detection, use a wired "ondeis" sensor in combination with the internal temperature sensor.
The pergola goes to its « Snow position »
Default « Snow position »: set during the settings
Default temperature of detection: 5°C
Refer to Set&Go io Somfy product to customise:
▪ The position: settable between 0 to 100%.
▪ The threshold: settable between 0°C to 8°C.
▪ The status: activation/deactivation.
NOTICE
• Automatic movements are authorized 15 minutes after the last detection of snow.
• Manual movements are authorized 30 seconds after the last detection of snow.
2.5.4.4. In case of wind
The pergola goes to its « Wind position ».
Default « Wind position »: 100% CLOSED
The function is not disable but the wind position is settable between 0 to 100%.
Refer to Set&Go io Somfy product to customise this function.
NOTICE
• Automatic movements are authorized 15 minutes after the last detection of wind.
• Manual movements are authorized 30 seconds after the last detection of wind.
2.5.4.5. In case of sun
The pergola goes to its « My position » or at the down end limit (Refer to the notice of
the Sun sensor).
Default « My position »: 50% CLOSED (Open at 10° approximatively).
Refer to Favourite (my) position [} 12] to change the position.
NOTICE
• Automatic and manual movements are authorized.
• The sensor is deactivated if the Auto / Manu button of the Situo io Variation is in manual position.
10
©
Copyright
2021 SOMFY ACTIVITES SA. All rights reserved.
Pergola io LOUVER CONTROL
Werbung
