Prerequisite Information; Field Of Application; Liability - SOMFY Tilt Only 50 RTS Central Pack Anleitung

EN
Tilt Only 50 RTS Central Pack

1. PREREQUISITE INFORMATION

1.1. FIELD OF APPLICATION

The Tilt Only 50 WF RTS Central is a motor specially designed for indoor
applications.
The Tilt Only 50 WF RTS Central can drive Venetian blinds made from wood or
imitation wood.
The installer, a drive or home automation professional, must ensure that once
the motorised product is installed, it respects the current standards in the
country of installation, notably standard EN 13120 relative to interior blinds.

1.2. LIABILITY

Before installing and using the drive, please read these instructions carefully. In
addition to the instructions provided in this guide, please also comply with the
instructions set out in the enclosed Safety instructions document.
The drive must be installed by a drive and home automation professional, in
accordance with Somfy's instructions and the applicable regulations in the
country of installation.
Any operation of the drive outside the sphere of application described above is
prohibited. Such operation shall exclude Somfy from all liability and invalidate
the Somfy warranty, as will any failure to comply with the instructions given
herein and in the enclosed Safety instructions document.
After installing the drive, the installer must inform his customers of the
operating and maintenance conditions for the drive and must pass the operating
and maintenance instructions on to them, as well as the enclosed Safety
instructions document. Any After-Sales Service operation on the drive requires
intervention by a drive and home automation professional.
Should any doubt arise during installation of the drive or for additional
information, consult a Somfy contact partner or visit www.somfy.com.
18 Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©