IKEA FORSNAS Bedienungsanleitung Seite 8

ENGLISH
Switching on
When you connect the mains plug to a power socket,
the appliance switches on and starts operating.
Display
•
After you plug in the appliance, it emits a ring
and all indicators light up for 3 seconds. Then all
indicators turn off except the 4°C indicator (
the compressor starts running.
•
In case of a known failure, the corresponding
indicators will blink.
Indicator status
The 2°C and 4°C indicators
( 1 and 2 ) are blinking.
The 2°C and super cooling
mode indicators ( 1 and
are blinking.
The 2°C and 6°C indicators
( 1 and 3 ) are blinking.
The 4°C and super cooling
mode indicators ( 2 and
are blinking.
Note: If there is a flashing failure, please call the
service center.
Setting the temperature
Recommended temperature: +4°C (factory setting)
• You can set the temperature of the refrigerator
compartment via the control panel.
• When the appliance is plugged in for the first time,
it sets the temperature to 4°C. When you plug
in or switch on the appliance again, it sets the
temperature to the last set temperature.
To set the temperature, press the temperature setting
button one or more times until the indicator for
B
the desired set temperature blinks. The indicator will
be steady in 5 second and the appliance will operate
according to the new set temperature in 15 seconds.
Note: If power cut in the first 30 min, it will return to
the previous setting.
2°C 4°C 6°C
Tips:
•
The lower the set temperature, the longer you can
safely store your food and the more electricity the
appliance consumes.
•
The higher the set temperature, the quicker your
stored food decays and the less electricity the
appliance consumes.
2 ) and
Fault
Refrigerator
temperature sensor
failure
Ambient temperature
4 )
sensor failure
Refrigerator defrosting
temperature sensor
failure
4 ) Communication failure
Super cooling mode
Super cooling mode
Note: The Super cooling function is specifically
designed to rapidly cool down newly placed food in
the fridge compartment. If you have a significant
amount of warm food, such as after grocery
shopping, it is recommended to activate the Super
cooling function. By doing so, you can ensure quick
cooling of the products and reduce the temperature
rise, thereby effectively prolonging the preservation
of all the other food items inside.
•
To put the appliance into super cooling mode,
press the temperature setting button
more times until the super cooling mode indicator
lights up. The appliance enters super cooling mode
in 15 seconds.
•
The appliance will automatically exit super cooling
mode after 6 hours. To exit this mode earlier, press
the temperature setting button
Door opening alarm
•
If the refrigerator door is kept open for more than
120 seconds, the door opening alarm will go off.
•
To stop the alarm, close the open door or press
button .
A
Switching off
•
To switch off the appliance, press and hold the
power button for 10 seconds. All indicators
A
turn off and the appliance stops operating in
15 seconds.
•
To switch the appliance back on, press and hold
the power button
A
resumes its operation.
•
To disconnect the appliance from the power
supply, disconnect the mains plug from the power
socket.
Bottle rack
•
Place closed bottles horizontally on the rack.
•
Use the rack to store bottled drinks only.
•
This rack can be removed from the refrigerator for
cleaning purposes or if not needed.
one or
B
.
B
for 10 seconds. The appliance
8