TEUFELBERGER treeMOTION USCA Bedienungsanleitung Seite 13

with DMM small Axis swivel-SW 100 used
on the rope bridge instead of the green
ring. The quoted swivel may therefore
be used as an alternative option.
4.1. MOUNTING OF
pic. 17
REPLACEMENT PARTS
Mounting of gear loops (included) on
your treeMOTION USCA/ treeMOTION
S.light USCA
pic. 18
2) Pass shock cord through base mate-
rial of harness. Tie stopper knot in one
end of the shock cord, leaving approx.
1 cm looking out of the end of the knot.
Cut the other end.
3) Tie stopper knot in the other end
of the shock cord. In this way you can
customize your harness by installing
gear loops anywhere between two holes
of the base material of the back pad or the
leg loops.
1) Cut tubing to
required lengths.
Insert shock cord.
pic. 19
5. LIMITATIONS OF USE
treeMOTION USCA / treeMOTION S.light
USCA may not be used in fall arrest situ-
ations. Slack in the climbing line should be
minimised at all times. There must not be
any chance of a free fall. „Free fall" does,
however, not mean e.g. slipping of the user´s
feet. Be aware of the potential for pendulum
swings and manage the risk.
Choose the connection of the harness to an
anchorage point at a level which will result in
the least total fall distance consistent with the
user' s ability to carry out work tasks.
Never carry out work with this product if, as
a result of your physical and mental condi-
tion, your safety might be compromised in
scenarios of normal use or in emergencies!
Repairs, modifications or additions to this
product, apart from the replacement of the
spare parts as described above, shall only
be made by the equipment manufacturer or
persons or entities authorized in writing by
the manufacturer.
6. TO BE OBSERVED PRIOR TO USE
Prior to using it, this product must be subject
to a visual inspection in order to verify
its integrity, readiness for use and proper
functioning.
Once the product has been subject to a fall,
its use must be discontinued immediately.
If the slightest doubt remains, the product
must to be retired or may not be used again
until a competent person, having subjected
RepLacement paRts
pic. 20
13