Herunterladen Diese Seite drucken

Jacuzzi Virtus Montageanweisung Seite 35

Vorschau ausblenden Andere Handbücher für Virtus:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 54
chapter. By modifying these parameters, time "0" is "shifted"
to the time in which the new values are saved.
S
USPENDING THE FILTERING CYCLES
Activating the hydromassage stops the filtration cycle, but it
resumes about 5 minutes after the function has turned off.
Moreover, with these models, the "silence" mode also sus-
pends the filtering cycle (refer to the respective section for fur-
ther details).
The filtering cycle may be suspended by the anti-freeze pro-
tection ("Smart Winter") or due to overheated water. Refer to the
respective chapters.
C
A
O
LEARRAY
CTIVE
XYGEN
The Clearray Active Oxygen™ system helps to disinfect and purify
water, thus reducing the need for chemical products.
The Clearray Active Oxygen™ system operates automatical-
ly and is dependent on activation of the filtration pump during
the filtering cycle; it remains off when the hydromassage is on;
Clearray Active Oxygen™ begins operating once again 40 min-
utes after switching off the aforementioned functions (where a
filtering cycle is active).
Hydromassage activation
This function is activated by pressing the "Pump"
tion is also signalled by the respective LED - display B - which may
also be flashing; on displays A1/A2, the button briefly lights up blue,
then returns to white).
A1
A1
To activate the function:
- briefly press the "Pump"
1 on/off (the button briefly lights up blue, then returns to white);
- press the "Pump"
button (display A2) to turn pump 2 on/off
(the button briefly lights up blue, then returns to white);
Jacuzzi Europe S.p.A. © 2023
™ (
).
WHERE EXPECTED
A2
A2
B
button (display A1) to turn pump
- press the "Pump"
1; press it again to turn on pump 2. Press the button a third
time to turn off pump 1 and a fourth time to turn off pump 2.
- The function turns off automatically after 20 minutes (if not turned
off by the user).
- If the electrical energy limiter has been activated, turning on a hy-
dromassage pump will switch off the heater.
Underwater spotlight
Press the "Light"
tub wall (activation is also signalled by the respective LED - display
B - which may also be flashing; on displays A1/A2, the button briefly
lights up blue, then returns to white).
The spotlight will stay on for 3 hours, but it can be turned off
before by pressing the key again (please refer to the user manual
for information on operating the various colour sequences).
Utility functions
"S
"
ILENCE
FUNCTION
This function prevents automatic start of the pumps (filtering cy-
cle); it can therefore help to reduce noise levels in the environment
(activa-
(e.g. at night).
The anti-freezing mode ("smart winter", see the respective sec-
tion) takes precedence over the "silence" function.
The function turns on through an external timer or time switch, to
be prepared as indicated on the pre-installation data sheet; the nor-
mally open contact of the timer must be connected to the hot tub's
electrical box (see wiring diagram).
The time can be used to program the periods in which the au-
tomatic operation of the pumps and/or the blower is to be turned
off (also refer to the documents that come with the timer).
However, it is possible to turn the hydromassage and/or spot-
light on (in these cases, the "silence" function is suspended and re-
sumes about one minute after the hydromassage and/or spotlight
turns off).
During the function, "Sby" appears on the screen.
Operation of filtering cycles in relation to the "silence" function
If the "silence" function is programmed so that it coincides with
the time slots reserved for the filtering cycle, this will be tempo-
rarily suspended; it will resume at the end of the "silence" func-
tion for the remaining time (example: if the function lasts 6 hours
and the filtering cycle 8 hours, the latter will resume operation for
the remaining 2 hours).
However, if the "silence" duration is greater than the filtering
cycle, this will not start at the end of the function, and the filtering
35
button once (display B) to turn on pump
button to activate the spotlight on the
Jacuzzi Europe S.p.A. © 2023

Werbung

loading