Parkside PAT 12 B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 15

5) Maintain power tools and
accessories. Check for misalignment
or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
6) Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less likely to
bind and are easier to control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different from
those intended could result in a hazardous
situation.
8) Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Battery tool use and care
Recharge only with the charger
1)
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
2) Use power tools only with
specifically designated battery
packs. Use of any other battery packs may
create a risk of injury and fire.
3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
4) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by
1)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
˜ Stapler/Nailer safety
warnings
m WARNING! RISK OF INJURY!
Do not point the tool towards yourself or
u
anyone nearby.
Make sure that no other people or animals
u
are on the other side of the workpiece or in
the immediate vicinity.
m WARNING! PROTECT YOUR EYES!
Wear safety goggles. This also applies
to people who are carrying out support
during operation.
Secure the workpiece!
A workpiece securely held by a
clamping device or vice is much safer
than one held in your hand.
Always assume that the tool
1)
contains fasteners. Careless handling of
the tacker can result in unexpected firing of
fasteners and personal injury.
2) Do not point the tool towards
yourself or anyone nearby.
Unexpected triggering will discharge the
fastener causing an injury.
GB 13