Parkside PAT 12 B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 13

m WARNING!
Wear ear protection!
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure.
m WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of workpiece is processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time. All
parts of the operating cycle must be taken
into account (e.g. times when the power
tool is switched off and when it is running
idle in addition to the trigger time).
Safety instructions
˜ General power tool safety
warnings
m WARNING!
Read all safety warnings, instructions,
illustrations and specifications
provided with this power tool. Failure
to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well
1)
lit. Cluttered or dark areas invite accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
Electrical safety
Power tool plugs must match the
1)
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
2) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased
risk of electric shock if your body
is earthed or grounded. Do not
expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
3) Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of electric
shock.
4) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
GB 11