Pre-Select Speed; Set The Direction Of Rotation; Changeover Drilling/Impact Drilling . 11 Practical Tips; Cleaning/Maintenance - Parkside PSBM 750 A1 Originalbetriebsanleitung

3. By using the on/off switch (7)
you can progressively control the
speed.
Gentle pressure: low speed
Increase pressure: higher speed.
4. Continuous operation: Press the
lock button (8). The on/off switch
(7) is locked.
5. Switching off: Release the on/off
switch (7).
For continuous operation, briefly
press the on/off switch (7).

Pre-select speed

You can pre-select the maximum speed on
the speed adjusting ring.
1. Wait for the device to shut-down.
2. Set the desired speed on
the speed adjusting ring
(12).

Set the direction of rotation

The device's direction of rotation can be
changed with the rotational direction switch.
1. Wait for the device to shut-down.
2. Push the rotational direction
speed (6) into the desired posi-
tion:
Clockwise rotation:
to drill and screw in screws.
Anticlockwise rotation:
to loosen screws.
Changeover drilling/
impact drilling
1. Wait for the device to shut-down.
2. Drilling and screwing:
Set the changeover switch
(1) to the "Drill" symbol:
GB
3. Impact drilling:
Set the changeover switch (1)
to the "Impact drill" symbol:
Practical tips
• Always use the proper tool.
• Immediately switch of the device, if
the tool should get jammed. Change
the rotation direction to anticlockwise
rotation and the carefully unscrew the
jammed tool.
• Do not use any blunt or damaged tools
or accessories.

Cleaning/maintenance

Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. In this way you avoid dam-
age to the appliance and possible
injury to people.
Pull out the power plug before car-
rying out any work on the equip-
ment. There is a risk of electrocution
or of injury from moving parts.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
IE NI CY
11