Werbung
TURBO-V 550 CONTROLLER DESCRIPTION
The controller (model 969-9871) is a solid-state
frequency converter which is driven by a single chip
microcomputer and is composed of a PCB which
includes power supply and 3-phase output, analog and
input/output
section,
section.
The power supply converts the single phase (50-60 Hz)
AC mains supply into a 3-phase, low voltage, medium
frequency output which is required to power the Turbo-
V pump.
The microcomputer generates the variable output
frequency and controls the 3-phase output voltage
according to the software and the gas load condition of
the pump.
microprocessor
and
digital
Turbo-V 550 PCB Controller
Moreover, it manages signals from sensors, input/
output connection information to be displayed, and
gives outputs for a fully automatic operation.
A dedicated EEPROM is used to store pump operating
parameters
and
information upon failure.
The controller can be operated via remote signals
through input/output connectors.
The following figure is a picture of the Turbo-V
controller.
69
TECHNICAL INFORMATION
the
input/output
programmed
87-900-885-01 (D)
Werbung
