Waeco MagicSafe MS650 Montageanleitung Und Bedienungsanleitung Seite 41

MS-650.qxd 13/08/03
General safety and installation instructions
Warning! Due to risk of short-circuiting, always disconnect the
negative pole of the battery before starting with work on the
electrical equipment of the vehicle.
In the case of vehicles with a supplementary battery, also
disconnect this negative pole.
Caution!When disconnecting the negative terminal of the
battery, all volatile memories of the comfort-electronics lose
their stored data.
Depending on the vehicle's equipment, the following data may need to be
reprogrammed:
Radio code
Clock
Timer
Board computer
Seat position
Instructions on how to reset these can be found in the relevant operating
instructions.
Warning! Parts of the magic safe MS-650 which are inside the
vehicle, must be securely fixed so that they cannot come loose
and injure the vehicle's occupants under any circumstances
(sudden braking, traffic accident).
Caution! To check the voltage in electric cables, use only a
diode test lamp (see ✎ A 1) or a voltmeter (see ✎ A 2). Test
lamps (see ✎ A3) which light up consume too much
current and the vehicle electronics may be damaged.
Caution! To avoid damage, always ensure that there is
enough space for the drill bit to emerge. Every drill hole
must be deburred and treated with a rustproofing agent.
12:58 Page 41
41