General Safety And Installation Instructions - Waeco MagicSafe MS650 Montageanleitung Und Bedienungsanleitung

MS-650.qxd 13/08/03

General safety and installation instructions

Warning!Improper cable connections may result in short
circuits which can cause:
– cable fires
– triggering of the airbag
– damage to electronic control equipment
– electrical functions (indicator, brake light, horn, ignition, light)
fail through being short-circuited
Please note the following
For working on the cables,
30 (input from battery plus direct),
15 (switched plus, behind battery)
31 (return cable from battery, earth)
L
(blinker left)
R (blinker right)
All lines in the circuit diagrams are provided with a colour code (see
Table ✎ I 2).
The securest form of connection is obtained by soldering the cable ends
and then insulating the connection.
For releasable connections, use only insulated cable brackets, connector
plugs, and flat pin sleeves. Do not use crimp connections (line connector)
or wire connectors. For connecting the cables with cable brackets, plugs
or flat pin sleeves, use crimping pliers.
With cable connections to 31 (mass):
Attach the cable with a bracket and toothed washer to an earthing screw
on the vehicle or screw it onto the metalwork of the vehicle using a
bracket, metal screw and toothed washer.
Always ensure that the connection is properly earthed!
12:58 Page 40
40