Parkside PSSSA 20-Li B2 Originalbetriebsanleitung Seite 34

GB MT
Replacement­parts/Accessories
Spare parts and accessories can be obtained at
If­you­have­issues­ordering,­please­use­the­contact­form.­If­you­have­any­other­questions,­
contact­the­"Service-Center"­(see­page­36).
Position Description
4.1 Saw blade for metal T118A, cordless jigsaw saw
4.2 Saw blade for wood T144D, cordless jigsaw saw
11­ Saw­blade­for­metal­SE­922­AF,­cordless­sabre­saw­
12­ Saw­blade­for­wood­SE­644D,­cordless­sabre­saw­
Trouble shooting
­ Turn­off­the­appliance­and,­before­doing­any­servicing,­remove­the­battery.­
Risk of electric shock!
Problem
Appliance won't
start
Intermittent
operation
Poor­sawing­per-
formance
Saw blade quickly
becomes blunt
34
www.grizzlytools.shop
Possible cause
Battery (14) not inserted
Battery (14) discharged
On/Off­switch­(3)­defective
Motor­defective
Internal loose contact
On/Off­switch­(3)­defective
Saw blade (4.1/4.2/
11/12) is blunt
Incorrect sawing speed
Low battery power
Too much pressure applied
Sawing speed too high
Corrective action
Insert­battery­(14)­(Observe­the­se-
parate operating instructions for the
rechargeable battery and charger)
Recharge­battery­(14)­(Observe­the­
separate operating instructions for the
rechargeable battery and charger)
Send­in­to­Service­Centre­for­repair
Send­in­to­Service­Centre­for­repair
Insert a new saw blade (4.1/
4.2/11/12)
Adjust sawing speed
Charge­the­battery­(14)­(observe­
the separate operating instructions
for the battery and charger)
Reduce the pressure
Reduce the sawing speed
Order no.
13800403
13800406
13800405
13800404