Parkside PSSSA 20-Li B2 Originalbetriebsanleitung Seite 24

GB MT
Technical data
Cordless Jigsaw &
Sabre Saw 20V .......PSSSA 20-Li B2
Nominal­input­voltage ................. 20 V
Idle speed n .................800 - 3000 min
0
Saw stroke .................................. 20 mm
Cutting depth in wood
Cordless Jigsaw ................ max. 50 mm
Cordless sabre saw ......... max. 100 mm
Cutting depth in metal
Cordless Jigsaw .................. max. 4 mm
Cordless sabre saw ........... max. 50 mm
Weight (without battery).... approx.­1.7 kg
Sound­pressure­level­­
(L ) ................... 84.3 dB(A), K
pA
Sound­power­level
(L ) .................95.3 dB(A), K
WA
Vibration (a ) 2
h
Cordless Jigsaw
in wood a .... 9.21 m/s
h,B
in metal a .. 10.36 m/s
h,M
Cordless sabre saw
in wood a .... 8,68 m/s
h,B
in wooden beam
a ............... 7.79 m/s
h,WB
Temperature.......................... max.­50 °C
Charging process ...................4­-­40 °C
Operation .......................... -20­-­50 °C
Storage .................................0­-­45 °C
Charging­times
Charging time
(min.)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1
24
= 5 dB
pA
= 5 dB
WA
; K= 1.5 m/s
2
2 ; K= 1.5 m/s
; K= 1.5 m/s
2
2 ; K= 1.5 m/s
PAP 20 A1
PAP 20 A2
PAP 20 B1
60 90
45 60
35 45
35 45
35 40
Levels­of­noise­and­vibration­were­determi-
ned according to the standards and regula-
tions in the declaration of conformity.
The­specified­total­vibration­value­and­the­
stated­noise­emission­value­have­been­
-1
measured according to a standardised test
method and can be used to compare one
power tool with another.
The­specified­total­vibration­value­and­the­
stated­specified­noise­emission­value­can­
also­be­used­for­a­provisional­assessment­of­
the load.
Warning:
The­vibration­and­noise­emissions­
may­deviate­from­the­specified­values­
during actual use of the power tool, depen-
ding on how the power tool is being used
and, in particular, what kind of material is
being worked on.
2
2 Safety measures for the protection of
the operator are to be determined that
are based on an estimate of the actual
2
vibration­load­under­the­real­operating­
2 conditions (for this, all parts of the opera-
ting cycle are to be taken into account, for
example, times in which the electric tool is
turned off, and those during which it is tur-
ned on but running without a load).
PAP 20 A3
Smart
PAP 20 B3 PAPS 204 A1
120
80
60
60
40
Smart
PAPS 208 A1
120 210
80 165
50 120
50 120
40 50