Bosch Rexroth PSI 6xCx.179 Anleitung Seite 28

28/48 Bosch Rexroth AG
Regarding this Documentation
1.3 Display of information
In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1 Safety instructions
For safety instructions, refer to Tab. 1: Required and supplementary
documentation Rexroth PSI6xxx Weld Timer with Medium-Frequency Inverter
Instructions and Rexroth Weld Timer Safety and user information.
1.3.2 Symbols
The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3 Designations
This documentation uses the following designations:
Designation
Tab. 3:
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
KSR
Constant current regulation
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
PSF
Prozess stability
XQR
UI control module
STC TEACH Sheet Thickness Combination, teaching
1.3.4 Abbreviations
For information on the abbreviations used in this documentation, refer to Tab. 1:
Required and supplementary documentation Rexroth PSI6xxx Weld Timer with
Medium-Frequency Inverter Instructions.
R911174862 | PSI 6xCx.179