Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.3. Inspection
The product must be regularly inspected by a qualified person. The qualified person needs to be authorised by the
operator to perform the inspection and is also required to have participated in the seminars mandatory in the country of
use.
After performing an inspection (without finding any defects) or after repairing existing defects, affix an inspection plate to
the product (see chapter "10 Protocol and checklist for periodic inspections").
6.3.1. Inspection intervals
The user must carry out daily inspections to check that the product is fit for use.
A qualified person must carry out an inspection (including the relevant documentation) at least once a year.
6.3.2. Scope of inspection
Check all components for deformation, denting and cracks.
Check that all screwed and riveted connections are properly secured. Where applicable, check whether the
bolt torques meet the specifications.
Check all welded seams for cracks.
Check that castors, wheels, brakes and chassis stabilisers function properly.
If a swing door or pole barrier is fitted, check that it functions properly.
Check whether optional parts and accessories are installed correctly.
EN
59
Werbung
