Panasonic WJ-AVE5 Betriebsanleitung Seite 16

°
LIVE STILL
To return to a live picture, press the A-bsu Still ON/OFF
Switch (13) again. The LED lights off.
STROBE
Press the A-bus Strobe ON/OFF Switch (15) to obtain
strobe effects. (This function can be much likened with
still pictures played in slow motion of 0.2 to 1 second
intervals.)
_ The interval of strobe will be changed by pressing this
switch as follows.
First time - 0.2 sec., Second time - 0.4 sec., Third
time - 0.6 sec.,
Forth time - 0.8 sec., Fifth time - 1.0 sec. (The
interval is sapremimate)
The strobe effect will return to a normal, live picture
when this switch is pressed sixth time.
MOSAIC
Press the A-bus Mosaic ON/OFF Switch (17) to obtain
a mosaic effect of the picture.
The size of the rectangles can be changed in four steps
by pressing this switch repeatedly.
LARGE SMALL
To return to a normai picture, press this switch fifth
time.
> PAINT
Press the A-bus Paint ON/OFF Switch (19) to obtain
an oil-paint touch effect on the picture.
=
PAINT ON
(PAINT LEVEL: HIGH)
PAINT OFF
The graduation of the paint can be changed in four
steps by pressing this switch repeatedly.
5-1.
To return to a normal picture, press this switch fifth
time.
APPLICATIONS
Select the A-bus Source 1 Selection Switch (50) and
the B-bus Source 1 Selection Switch (51).
Press the Mix Mode Selection Switch (52).
Press the B-bus Digital Effect ON/OFF Switch (12) and
the B-bus Strobe ON/OFF Switch (16).
Move the Mix/Wipe Control (45) to the center position
to the obtain an after-image effect.
LIVE
AFTER-IMAGE
STROBE