Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING
PROCEDURE
1.
Make all necessary connections
e
2.
Turn ON the Digital AV Mixer and all other equipment
connected.
3.
Prepare the script of the program.
°
4.
Prepare ali necessary title cards.
Note:
Either the title cards with black letters on white or
white on black can be used for the superimpose
function.
5.
Store all titles to be superimposed in the Character
Generator WV-KB12/WJ-TTL5
while referring to the
operating instructions of the WV-KB12/WJ-TTLS5.
A. MIX/WIPE EFFECT, WIPE MODE
(MI
WIPE EFFECT Co
VIDEO
MIX
2.
J af
SOURCE
SOURCE
BACK
i
2
COLOUR
WIPE
fess
all
e
Press
the Effect Recording
Video
Output
Selection
Switch (33).
1.
MIX EFFECT
e
e
Press the Mix Mode Selection Switch (52).
e
Select the source signal for A-bus and B-bus from the
SOURCE 1, SOURCE 2 or BACK COLOUR.
In case back colour is selected, set the Back Colour
Selection Switch (5) to the desired colour.
peer
0 es
Confirm
that
the
LED
indicator
of the Video
Fade
Switch (37) lights off.
Operate the Mix/Wipe Control (45) from A to B, or vice
versa.
fy
A-bus
SCENE
1: INPUT A
RE
A-bus
&
B-bus
SCENE
1 and SCENE 2
B-bus
SCENE 2 :INPUT B
WIPE EFFECT
Press the Effect Recording
Video Output Selection
Switch (33).
Press the Wipe Mode Selection Switch (53).
Select the desired wipe mode from the Wipe Pattern
Selection Switches (6).
Refer to the pattern table on page 5 for combination of
the Wipe Pattern Selection Switches (6).
Select the source signal for A~-bus and B-bus from the
SOURCE 1, SOURCE 2 or BACK COLOUR.
In case back colour is selected, set the Back Colour
Selection Switch (5) to the desired colour.
Confirm
that the LED
indicatior
of the Video
Fade
Switch (37) lights off.
Operate the Mix/Wipe Control (45) from A to B, or vice
versa.
Werbung
