Werbung
Verfügbare Sprachen
Verfügbare Sprachen
■ Bank Selection and MIDI Channel Programming
® Press the UTILITY button until the MIDI CONTROL function
appears (MIDI CONTROL is the second function on the
UTILITY list").
(D Select the bank to program using the
and [^buttons.
(D
Press the STORE button to move the cursor to the channel
(ch) parameter.
® Use the
and M buttons to set the receive MIDI channel
(1 — 16), the OMNI mode (all channels can be received),
or turn MIDI reception OFF for the seiected bank.
■ Assigning Effects to MIDI Program Change Num¬
bers
® Press the UTILITY button until the MIDI PROG CHANGE
function appears (MIDI PROG CHANGE is the third func¬
tion on the UTILITY "list").
® Use the
and
buttons to select the program change
number to which a new GEP50 memory iocation number
is to be assigned. The range of availabie program change
numbers is from 1 to 128.
(D
Press the STORE button to move the cursor to the MEM
(memory number) parameter.
(D Press the MEMORY button to return to the BANK parame¬
ter if you wish to select a different bank for programming.
MIDI channel number
27
GEP50 GUITAR EFFECT PROCESSOR
Use the
and
buttons to select the memory location
number containing the effect which is to be assigned to
the currentiy seiected program change number.
Press the MEMORY button to return the cursor to the PGM
(program number) parameter in order to select a new pro¬
gram change number for effect assignment.
Werbung
