Werbung
Verfügbare Sprachen
Verfügbare Sprachen
23. Phase Dist.
24. Symphonic Dist.
Phasing plus distortion.
Distortion Levei (DiSTORTiON): 0 — 100%
Sets the "degree" or "depth" of the distortion portion of the
effect.
Phase Baiance (PHASE BAL): 0
--
100%
Determines the amount of phase effect applied to the distor¬
tion sound.
Modulation Frequency (MOD. FRQ): 0.1 Hz — 20 Hz
Sets the speed of the effect variation.
Modulation Depth (MOD. DEPTH): 0% — 100%
Sets the depth of the effect.
Modulation Delay (MOD. DLY): 0.1 — 8.0 miliiseconds
This sets the basic delay time from the initial direct sound to
the beginning of the phase effect.
Trigger Levei (TRG. LEVEL): 1 — 100
Determines the amplitude of the input signal required to
trigger the effect. This parameter, in conjunction with the
RELEASE parameter below, functions effectively as a noise
gate to cut out hiss and noise when an input signal is not
present. TRG LEVEL should be set so that the effect is
activated only when a note is played on the instrument
used.
Release Time (RELEASE): 5 — 32000 milliseconds
Determines the amount of time it takes for the distortion
gate to close after the input signal drops below the trigger
level. Proper setting of the RELEASE parameter is essential
to allow a natural decay of the source instrument sound.
Symphonic plus distortion.
Distortion Level (DISTORTION): 0 — 100%
Sets the "degree" or "depth" of the distortion portion of the
effect.
Symphonic Baiance (SYMPHO BAL): 0 — 100%
Determines the amount of symphonic effect applied to the
distortion sound.
Modulation Frequency (MOD. FRQ): 0.1 Hz — 20 Hz
Sets the speed of the effect variation.
Modulation Depth (MOD. DEPTH): 0% — 100%
Sets the depth of the effect.
Trigger Level (TRG. LEVEL): 1 — 100
Determines the amplitude of the input signal required to
trigger the effect. This parameter, in conjunction with the
RELEASE parameter below, functions effectively as a noise
gate to cut out hiss and noise when an input signal is not
present. TRG LEVEL should be set so that the effect is
activated only when a note is played on the instrument
used.
Release Time (RELEASE): 5 — 32000 miliiseconds
Determines the amount of time it takes for the distortion
gate to close after the input signal drops below the trigger
level. Proper setting of the RELEASE parameter is essential
to allow a natural decay of the source instrument sound.
17
GE?50 GUITAR EFFECT PROCESSOR
Werbung
