Manufacturer And Appliance Nameplates; Service Request Procedure - Angelo Po 0S1FR3GD Bedienhandbuch

GENERAL INFORMATION

MANUFACTURER AND APPLIANCE NAMEPLATES

The nameplates shown here are fi tted directly
to the appliance.
One (fi g.1) contains references and all essential
information for operating safety, and the other
(fi g.2) provides gas information for each coun-
try of use.
Appliance model
A)
Type of customisation
B)
Manufacturer's nameplate
C)
Type of fume exhaust vent
D)
Serial number
E)
Protection rating
F)
CE marking of conformity
G)
Reference standard
H)
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website http://
www.angelopo.com.
3413880_inst_GB

SERVICE REQUEST PROCEDURE

CE marking
L)
Product family type
M)
Gas pressure
N)
Appliance category
P)
Gas consumption
Q)
Rated power (kW)
R)
Gas type
S)
Destination country code
U)
Date of construction
V)
Voltage (V)
W)
Frequency (Hz)
X)
Rated power (kW)
Y)
Injector diameter
Z)
When requesting service, state the data indi-
cated on the nameplate and provide a descrip-
tion of the fault.
ENGLISH
5