Switching The Appliance On And Off - Angelo Po 0S1Fr3Gd Bedienhandbuch

ENGLISH
Switching on the appliance
Connect the appliance to the mains power
1)
supply using the master switch-disconnec-
tor. The mains light (P) goes on
Open the gas supply tap.
2)
Press key (B) to switch the appliance to
3)
"stand-by" mode. The mains light (P) goes off
and the screen shown appears on the display
(A).
Open the hatch (E).
4)
Press the knob (L) and turn it anti-clockwise
5)
(pos. 3) to turn on the pilot light.Hold the
knob down for approximately 15 seconds to
start up the thermocouple.
Press the knob (L) and turn it anti-clockwise
6)
(pos. 4) to turn the burner on.
Close the hatch (E).
7)
Press key (B) to switch on the appliance and
8)
start the cooking cycle. The set cooking tem-
perature will appear (red) on the display (A).
Turning off the appliance
Press and hold key (B) for about 6 seconds to
1)
stop the cooking cycle and switch off the ap-
pliance. The mains light (P) goes on
Open the hatch (E).
2)
Press the knob (L) and turn it clockwise (pos.
3)
5) to turn the burner off . The pilot light will
remain on to allow for the burner to be re-lit.
Press the knob (L) and turn it clockwise (pos.
4)
6) to turn off the pilot light.
Close the gas supply tap.
5)
Close the hatch (E).
6)
Disconnect the appliance from the mains
7)
power supply using the automatic switch-dis-
connector.
22

SWITCHING THE APPLIANCE ON AND OFF

USE AND OPERATION
B
P
C F
3
B
6
A
G D
4
L
E
5
3413880_ut_GB