Resetting The Appliance; Long Periods Of Shut-Down - Angelo Po 0S1Fr3Gd Bedienhandbuch

USE AND OPERATION
If the safety thermostat trips, the appliance
needs to be reset to the initial working condi-
tions as follows.
Let the oil cool down to 30-40°C.
1)
Open the hatch (A).
2)
Press key (B) of the safety thermostat to re-
3)
store the gas supply.
NOTE: To identify the thermostat that
has tripped, check which burner has turned
off and press the relevant button.
Close the hatch (A).
4)
If the appliance is left inactive for a lengthy pe-
riod, proceed as follows.
Disconnect the appliance from the mains
1)
power supply using the automatic switch-dis-
connector.
Close the gas supply tap.
2)
Clean the appliance and the surrounding ar-
3)
eas thoroughly.
3413880_ut_GB

RESETTING THE APPLIANCE

LONG PERIODS OF SHUT-DOWN

A
Spread a fi lm of edible oil over the stainless
4)
steel surfaces.
Carry out all the servicing procedures.
5)
Cover the appliance and leave a few gaps to
6)
let air circulate.
ENGLISH
A
B
25