General Notes - WimTec OCEAN W6 Montage- Und Bedienungsanleitung

OCEAN W6

General notes

The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
Congratulations on purchasing WimTec OCEAN W6.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, nano sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
Lime deposits on the glass front panel combined with wetness can
impair the touch-tronic function. To ensure proper operation,
we recommend regular cleaning of the glass panel using a
power cleaner.
This manual is valid for the following products:
WimTec OCEAN W6 wall fitting
Art.No. 112 382, 114 638, 118 803, 118 810
WimTec OCEAN W6 wall fitting with thermal disinfection
Art.No. 112 405, 114 645, 118 827, 118 834
Delivery scope:
Safety glass front plate with chorme frame and mixing lever, elect-
ronics module and outlet.
Important installation notes:
Provide for a flush-mount box for an optional power supply outside
of the protected zone. Mounting and installation may only be
performed by a qualified service provider in accordance with DIN
1988, ÖVE/ÖNORM E8001 and VDE 0100 Part 701. When planning
and installing sanitary facilities, all relevant local, national and
inter-national standards and provisions must be observed!
!
According to the Austrian ÖNORM B 5019, thermal disinfection re-
quires a minimum temperature of 60 °C for at least 10 min at the
relevant system locations. The operator must ensure that all parts
of the installation (e.g., piping) can withstand the temperatures
applied during thermal disinfection.
WimTec OCEAN W6
Wall tap control
EN
17