EN
OCEAN W6
Assembly
1
4
!
ATTENTION!
Perform the following steps
in the order indicated!
22
Wall tap control
2
5
1.
Remove the flush-mount protective cover.
2.
Cut off protruding parts from the flush-mount box so it aligns
with the tiles.
3.
Where necessary, seal off space between wall and flush-
mount set with silicone.
4.
Close the main water valve.
5.
Open both integrated stop valves using a screwdriver.
6.
Mount adapter for thermostat using a 2.5 Allen key.
WimTec OCEAN W6
3
6