The Set-Up Menu; Possible Settings And Adjustments; Function Principle; Setting The Parameters - Fronius TransPocket 1500 Bedienungsanleitung

The set-up menu

Possible settings Adjust the following parameters within the set-up menu
-
and adjustments
-
-
-
Function prin- The parameters are a 4-stage setting on the TP 1500 / TP 1500 RC, and a 5-stage
ciple setting on the TP 1500 TIG.
The numbers of indicators that have lit up correspond to the setting value (stage).
Indicators light up:
None
One
Two
Three
Four (TP 1500 TIG Only)
Fig.11 Example of stage indication (only applicable to TP 1500 TIG)
Setting the The following example of how to set a parameter is for the rod-electrode welding pro-
parameters cess, as illustrated by the arc-force parameter.
-
-
Important! Even if you unplug the machine from the mains, the selected parameters
will still be stored.
Arc force (for the rod-electrode welding process)
Characteristic (for the rod-electrode welding process with CEL electrodes)
TIG Comfort Stop (for the TIG welding process - TP 1500 TIG only)
Frequency (for the TIG pulsed-arc welding process - TP 1500 TIG only)
Stage 3
- Select the rod-electrode welding process (10) by pressing and
(10)
holding the process button (6)
- The pre-set stage is indicated for 1 second
As long as you hold the process-button (6), the arc-force parame-
ter will be increased by one stage per second.
(6)
- As soon as the desired stage is indicated
-
The setting-value (stage) for the arc-force parameter is stored
The rod-electrode welding process is indicated
Einstellung
Stage 0
Stage 1
Stage 2
Stage 3
Stage 4
Example: if three indicators are lit up, the setting is on
Stage 3
Release the process button (6)
1 6