Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
WIPE EFFECT
Set the Input Mode Selection switch © to 2=2% or
soe.
Note:
In case you want to process the SOURCE 1 video
signal with digital effects (e.g., Mosaic, Paint),
select 3=89. Select :3&9 for the SOURCE
2
video signal.
e
Press the Effect Switch of the Recording Video Output
Selector switches @.
Press
the WIPE
switch
of the
Mix/Wipe
Selection
switches @.
Select the desired wipe mode by pressing one of the
Wipe Pattern Selection switches @.
If Circle ( J) or Square ( &) with positioner control
is desired, press one of these switches ®.
POSITIONER
If another wipe pattern is desired, refer to the Pattern
table shown below for combination of the switches @.
WIPE PATTERN
(E.g., forthe
(—D _ pattern, press switches
@)
and
CB )
e
Select the source signal for A-bus and B-bus from the
VIDEO 1, VIDEO 2 or BACK COLOUR.
In case back colour is selected, set the Back Colour
Selection switch @ to the desired colour.
e
Confirm that the LED indicator of the VIDEO switch of the
Fade Control switches @ is off.
e
Operate the Mix/Wipe Lever @ from A toB, or vice versa.
iG
A-bus
B-bus
B-bus
3.
WIPE MODE
There is a choice of Wipe mode from SOFT wipe or BORD-
ER wipe.
e
Press the SOFT mode @ to obtain a dimmed wiping
edge.
e
Press
the
BORDER
mode
®
once
to
obtain
a
clear/narrow wiping edge. If press it again, the wiping
edge changes to clear/wide. To cancel the BORDER
mode, press it &) one more time.
e
The colour of BORDER
is a complementary colour of
the Back Colour (See Back Colour Selection Switch @.)
Back Colour
|White]Yellow}]Cyan|
Green
|Magenta
Red | Blue
[ Biack |
Border Colour]
Black}
Blue | Red
|Magenta]
Green
Cyan] Yellow| White |
4.
AUTO
TAKE
In stead of the lever controlled
Mix & Wipe
using the
Mix/Wipe Lever @, automatic Mix & Wipe control can be
made by AUTO TAKE function.
e
§=6©Turn the Mix/Wipe Lever @ to A-bus position. The LED
lights up or blinks. (Depends on the position of lever)
e
Press AUTO TAKE switch @, then the Mix/Wipe will
be performed automatically from A-bus to B-bus.
e
The speed can be adjusted by SPEED contro! @ from
0.2 sec. to 2 sec. approximately.
Werbung
