Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SYSTEM CONNECTION
Caution:
Keep the POWER ON/OFF switch turned OFF while making the connections.
1. Connect the coaxial cable with BNC connectors between the video output of the VTR, Video Disc Player, TV Tuner Output
or Video
Camera
and the SOURCE
1 VIDEO
IN connector
on the rear panel of the Production
Mixer or connect
S-video
cable (4 pin) between S-VHS VTR and the SOURCE
1 S-VHS Video Input Connector on the rear panel of the Production
Mixer. When S-VHS VTR is connected Y/C-composite Selection Switch should be set to Y/C position.
2. Connect the audio cable with pin plugs between the audio output of the VTR (S-VHS VTR), Video Disc Player, TV Tuner
Output or Video Camera and the SOURCE
1 AUDIO IN connectors on the rear panel of the Production Mixer.
3. Connect the coaxial cable or S-video cable (4 pin) and audio cable for the SOURCE 2 inputs of the Production Mixer in the
same manner as steps 1 and 2 above.
4. Connect the coaxial cable with BNC connectors between the video output of the external camera (B/W or colour camera for
superimposing) and the EXT CAMERA IN connector of the Production Mixer.
5. Connect the coaxial cable with BNC connectors between the SYNC IN (GEN LOCK IN) connector on the external camera and the
SYNC OUT connector of the Production Mixer.
6. If the Character Generator WV-KB12
(sold separately) is used, connect the 10-pin cable connector of the Character Generator to
the TITLE connector of the Production Mixer.
7. lf an auxiliary audio source is required, connect the audio cable with pin plugs between the audio output
of the audio source(
CD
Player, Tape Recorder or Record Player) and the AUX IN connectors of the Production Mixer.
8. Ifnecessary, connect the microphone cable with a tip-ring-sleeve type or tip-sleeve type phono plug to the MIC input connector of
the Production Mixer.
9. For previewing the image, connect the coaxial cable with BNC connectors between the PREVIEW OUT connector of the
Production Mixer and the VIDEO IN connector of a video monitor.
10.
For recording,
connect the coaxial cables with BNC connectors
(S-video cable) between
the REC VIDEO
OUT
connectors
of the Production Mixer and the VIDEO IN (S-VHS VIDEO IN) connectors of the VTR (S-VHS) and Video Monitor.
AUDIO
SYNC OUT
EXT CAMERA IN
VIDEO OUT
SYNC IN
External Camera
HEADPHONE
MIC
-
Character Generator
System Connections
WV-KE12
==
Werbung
