Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Reverse
Effect
e
Select the polarity of the key signal to be superimposed
by pressing the Reverse switch @.
Original Picture
Becomes the title colour
Title
Original Picture in the title
Superimposed Picture
3.
Title Effect
e
If desired, the edge enhancement of the title can be
obtained
by pressing the TITLE
EFFECT
switch @
repeatedly.
The effected picture will be as follows.
Normal + Narrow Border > Wide Border —
| — Narrow Shadow — Wide Shadow =
Normal
Narrow Border
Wide Border
Narrow Shadow
Wide Shadow
[\ =>
/\ =>
Normal
1)
Set the Input Mode Selection switch @ to 3=2% or
25887.
Note:
Incase you want to process the SOURCE 1 video
signal with digital effects (e.g., Mosaic, Paint),
select 3=82. Select :3@® for the SOURCE 2
video signal.
2) Press the Effect Switch of the Recording Video Output
Selection switches @.
3)
If the Mix/Wipe Lever @ is turned fully to the A-bus
position, the LED on A-bus lights up. However, in case
that the Lever @ is turned half-way down to the A-bus
position, the LED on A-bus blinks.
1.
MIX EFFECT
©
Press the MIX switch of the Mix/Wipe Selection switches
@.
e
Select the source signal for A-bus and B-bus from the
VIDEO 1, VIDEO 2 or BACK COLOUR.
In case back colour is selected, set the Back Colour Selec-
tion switch @ to the desired colour.
e
Confirm that the LED indicator of the VIDEO switch of the
Fade Control switches @ is off.
Operate the Mix/Wipe Lever ® from A to B, or vice
versa.
és
A-bus
if
SCENE 1: INPUTA
RA
A-bus
&
B-bus
SCENE
1 and SCENE 2
B-bus
SCENE 2 : INPUT B
Werbung
