Herunterladen Diese Seite drucken

HT SOLAR03 Bedienungsanleitung Seite 31

Vorschau ausblenden Andere Handbücher für SOLAR03:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 62
22/03/23 – 15:35
SETTINGS
MEMORY
PAIRING
HELP
INFO
STOP RECORDING
5. OPERATING INSTRUCTIONS
5.1. FOREWORD
The remote unit SOLAR03 carries out the following measurements:
➢ Inputs INP1...INP3 → measurement of Irradiance (expressed in
2
W/m
) on Monofacial (INP1) and Bifacial (INP1 front and INP2 +
INP3 back) modules through sensor(s) HT305
➢ Input INP4 → measurement of Temperature of PV modules
(expressed in °C) through sensor PT305 (only in connection with
– see Table 1)
the Master unit
The remote unit SOLAR03 operates in the following modes:
1.
Independent operation with no connection to a Master
instrument for measurement in real time of irradiance values
2. Operation in Bluetooth BLE connection with a Master
instrument for the transmission of irradiance and temperature
values of PV modules
3. Recording synchronized with a Master instrument, to record the
PV modules' irradiance and temperature values to be sent to
the Master instrument at the end of the test sequence
5.2. GENERAL MENU
1.
Press key MENU. The screen on the side appears on the display.
Use the arrow keys and press key ENTER to enter the internal
menus.
2. The following menus are available:
➢ SETTINGS → allows showing the probes' data, setting the
language and the system date/time.
➢ MEMORY → allows showing the list of saved recordings
(REC), see the residual space and deleting the memory's
content
➢ PAIRING → allows pairing with the Master unit via Bluetooth
connection
➢ HELP → activates the help on line on the display and shows
the connection diagrams
➢ INFO → allows displaying the data of the remote unit: serial
number, internal version of FW and HW
➢ STOP RECORDING → (displayed only after a recording has
been started). It allows stopping a recording of the
irradiance/temperature parameters in progress on the
remote unit, previously started by a Master instrument
paired with it (see § 5.4)
If a recording is stopped, the values of irradiance and
temperature will be missing for all measurements carried
out by the Master instrument afterwards
31
CAUTION
SOLAR03

Werbung

loading