Description
1. Hopper opening for material to be shredded
2. Reset button / motor protection
3. On / Off switch
4. Direction of rotation selector switch
5. Power supply plug
6. Ventilation slots
7. Carriage
8. Ejection slot
Assembly
8
Remove all parts from the
packaging.
Mount each of the two
supporting
legs
with
washers (No. 8) and self-
locking nuts (No. 2) using the
nut wrench supplied on the
housing.
Mount the wheel axle (No. 3)
with the 2 screws M6 x 50 (No.
4), washers and nuts using the
socket wrench and nut wrench
supplied on the carriage.
Push the wheels (No. 5) onto
the axle.
Fasten the wheel cover (No. 6)
in the wheel axle using a
hammer.
two
11