Heraeus PALABOWL Gebrauchsanweisung Seite 5

1.
3.
5.
2
1
7.
2
1
9.
Place the bowl on a
flat surface and open
the lid.
Pour the single compo-
nents into the bowl
according to the instruc-
tions provided by the
cement manufacturer.
Start the vacuum and
begin mixing for about
45 seconds or according
to the instructions for use
of the bone cement.
Turn the lid counterclock-
wise and remove the lid.
Remove the thoroughly
mixed bone cement with
the spatula.
2.
1
4.
1
2
6.
2
8.
5
Connect the shorter end
of the vacuum hose to the
vacuum pump and the
opposite end (longer end)
to the lid.
If conditions permit,
adjust negative pressure
to the optimal range
2
between 65 kPa to 73 kPa.
Close the lid and twist
clockwise to lock.
Once mixing is complete,
stop the vacuum and
remove the vacuum hose.
1
To scrape the bone
cement on the mixing
paddle into mixing bowl
by using spatula or
curette.