Parkside PHKSA 12 B3 Originalbetriebsanleitung Seite 26

GB IE
7) ADDITIONAL SAFETY
INSTRUCTIONS
a) Do not use any accessories (see
section "Spare parts/accesso-
ries") that are not recommended
by PARKSIDE. This can result in elect-
ric shock or fire.
8) SPECIAL SAFETY INSTRUCTIONS
FOR USING THE CORDLESS
CIRCULAR SAW
a) Do not use grinding discs.
b) Select the right saw blade based
on the material you will saw.
Saw blades that are intended for cut-
ting wood or similar materials must
comply with EN 847-1. Only use the
saw for cutting wood, plastic and light-
weight materials
c) Only use saw blades with a
speed designation that meets
the specified speed for your ap-
pliance or higher.
d) Only use saw blades with a dia-
meter of 85 mm corresponding
to the markings on the saw bla-
de.
e) Make sure the tips of the saw
teeth do not overheat.
f) When sawing plastic, make sure
the plastic does not melt.
g) Pay attention to the maximum
cutting depth. (see technical
data)
h) When sawing, wear a dust
mask.
i) Always wear hearing protection!
26
9) RESIDUAL RISKS
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety informa-
tion and notes on charging
and proper use as shown
in the instruction manual
for your battery and char-
ger from the Parkside
X 12 V Team series. A detailed
description of the charging
process and further informa-
tion can be found in the sepa-
rate operating instructions.