Reiner jetStamp 790 Bedienungsanleitung Seite 77

jetStamp 790/790 MP
3.10. Password [SETUP]
Blocks access to the Setup-Module with a password and protects it against misuse.
The factory-set password is 2468.
Proceed as in menu access (see page 49).
Press [NEXT] until "PASSW SETUP" appears.
f
Press [VARY].
f
To activate the password input, press [ON].
f
Password input is active.
To modify the password, press [RETURN] once
f
(see "Password Set-up", page 77).
– or –
In order to deactivate password input, enter the defined password.
f
To confirm the password, press [RETURN] once.
f
Password input can now be deactivated.
To deactivate password input, press [OFF].
f
To move directly to the next menu item,
f
press [RETURN] once.
– or –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
3.11. Password [CLOCK]
Blocks access to the clock setting module with a password and protects it against misuse.
The factory-set password is 2468.
Proceed as in menu access (see page 49).
Press [NEXT] until "PASSW CLOCK" appears.
f
Press [VARY].
f
To activate the password input, press [ON].
f
Password input is active.
To modify the password, press [RETURN] once
f
(see "Password Set-up", page 77).
– or –
In order to deactivate password input, enter the defined password.
f
To confirm the password, press [RETURN] once.
f
Password input can now be deactivated.
GB
75